Udemy STAAD Pro Certification Course Concrete and Steel Buildings

Files Included :

1 Introduction to STAAD Welcome Screen and Structure Wizard.mp4 (249.51 MB)
MP4
10 Introduction to Member Specifications , Assigning Properties and Coefficients.mp4 (106.18 MB)
MP4
11 Introduction to Various Types of Foundations in STAAD.mp4 (67.71 MB)
MP4
12 Introduction to Various types of Loadings Types and their assignment.mp4 (110.12 MB)
MP4
13 Introduction to Floor Loading and Groups (Slab Loading).mp4 (112.54 MB)
MP4
14 Introduction to Floor Loads along the Horizontal Direction.mp4 (29.3 MB)
MP4
15 Introduction to Default Materials, Isotropic and Orthotropic Materials options.mp4 (60.29 MB)
MP4
16 Introduction to Pre Print and Post Print Analysis Commands.mp4 (34.76 MB)
MP4
17 Introduction to Analysis and Post Processing Mode to review the Results.mp4 (97.97 MB)
MP4
18 Calculation of Snow Load for Mono-Slope Roof.mp4 (94.34 MB)
MP4
19 Calculation of Unbalanced Snow Load on Gable Roof.mp4 (74.61 MB)
MP4
2 Introduction to GUI of STAAD , Local and GLobal Axis , Beam and Node Numbers etc.mp4 (120.03 MB)
MP4
20 Determination of Rayleigh Frequency and Modal Frequency of a Structure in STAAD.mp4 (175.49 MB)
MP4
21 Wind Load Generation of a Truss Tower Structure as per American Standards.mp4 (216.79 MB)
MP4
22 Basics of Wind Loads Guidelines as per ASCE07 and ATC Hazards.mp4 (176.07 MB)
MP4
23 Auto Wind Load Generation on RCC Structure as per ASCE 07.mp4 (192.38 MB)
MP4
3 Introduction to Basic Modelling, Cursors and Repeat Commands.mp4 (166.23 MB)
MP4
4 Introduction to STAAD Editor.mp4 (52.56 MB)
MP4
5 Introduction to Circular Grids and Circular Repeat Options.mp4 (118.97 MB)
MP4
6 Introduction to Releases and Diaphragm Specifications in STAAD.mp4 (151.74 MB)
MP4
7 Introduction to Offsets Specifications and Modelling of Bracings.mp4 (178.35 MB)
MP4
8 Modelling of Composite Deck, Plate Meshing and Parametric Modelling.mp4 (108.61 MB)
MP4
9 Introduction to Local Axis of the STAAD.mp4 (30.89 MB)
MP4
1 Reading Architectural Drawings of a School Building.mp4 (76.29 MB)
MP4
10 Assessment of Live loads as per IS875-Part 2 and Application on Beams.mp4 (40.58 MB)
MP4
11 Application of Equivalent Staircase Loading on RCC Beams.mp4 (83.88 MB)
MP4
12 Define Response Spectrum, Load Combinations and Mass Source for Seismic Weight.mp4 (266.88 MB)
MP4
13 Define Design Parameters as per IS456 and Interpetet the results.mp4 (272.11 MB)
MP4
14 Design and Detailing of Isolated footing as per IS456.mp4 (223.14 MB)
MP4
15 Design and Detailing of Combined Footing as per IS 456.mp4 (414.35 MB)
MP4
16 Explaination of Indian Seismic Detailing Standard IS 139202016.mp4 (148.26 MB)
MP4
17 Detailing of Column Main Reinforcement as per IS 4562000 and IS19202016.mp4 (168.5 MB)
MP4
18 Detailing of Column Ties as per IS 13920.mp4 (75.59 MB)
MP4
19 Detailing of Main Bars and Stirrups of Beams as per IS 456 and IS 139202016.mp4 (189.32 MB)
MP4
2 Plan the location of Column in the School Building.mp4 (156.62 MB)
MP4
20 Design and Detailing of Slabs as per IS456.mp4 (226.79 MB)
MP4
3 Modelling of School Building in STAAD.mp4 (165.06 MB)
MP4
4 Explaination of Live loading as per IS 875-Part 2 for School Building.mp4 (67.72 MB)
MP4
5 Assign Section Properties and Stiffness Reduction factors for Beams and Columns.mp4 (108.95 MB)
MP4
6 Define Wind and Seismic Definitions as per IS 1893 and IS 875.mp4 (165.57 MB)
MP4
7 Define Wind and Seismic Load Cases as per IS 875-3 and IS18932016.mp4 (128.35 MB)
MP4
8 Calculation of Brick wall Dead Loads and Assignment of Loading on the Beams.mp4 (210.74 MB)
MP4
9 Calculation of Dead Loads for Slabs and Application of Dead Loads in STAAD.mp4 (122.6 MB)
MP4
1 Introduction to Pad eyes and Design Guidelines.mp4 (112.31 MB)
MP4
1 2 AUTODESK INVENTOR FILE zip.zip (617.78 KB)
ZIP
2 FEM Analysis and Design of Pad Eyes for Lifting Arrangement.mp4 (194.76 MB)
MP4